The Chopping Block

LAMBSON VIOLINS | Violin Making & Repair

Saturday, April 13, 2013

The Chopping Block

Posted by Liz Lambson at 11:20 AM

Email This BlogThis!Share to Twitter Share to Facebook Share to Pinterest

No comments:

POPULAR POSTS

Heating Hide Glue with a Bottle Warmer

Melting or heating animal hide glue crystals in water with a bottle warmer is an old trick I learned back when I was the string instrum...
Gluing in the Linings with Clothespin Clamps

Bending the linings with the bending iron to fit the curves is much easier than bending the ribs. Once they're shaped, you can t...
Redoing the Corner Blocks

Peter Prier pointed out that my corner blocks were too short. I could make up for that by raising the center of the arching by a millim...
Common Instrument Repairs: Drilling New Peg Holes

A friend's daughter's violin strings kept breaking, and I was surprised her orchestra teacher didn't catch on to what was hap...
Cutting Feather Edges for the Violin Rib & Block Corners

I was nervous to do this step: using the corner gouge to cut a feather edge on each corner. If you mess it up both your block and rib can en...
Luthier & Bow Maker Tim Stephenson

I've known Tim for ten years. He worked on my bass and rehaired my bow throughout my time at BYU, and I still bring him my bow to rehair...
Cutting Mortises in Violin Corner Blocks

The mortises in the violin corner blocks, which will secure the linings in place, only need to be 7-8mm deep and maybe 6-7 long. A little...
Cutting Out the Violin Mold and Plexiglass Template

Hour No. 10 of a supposedly 200-hour project. I bought a fine-grit 30"x1" sanding belt at Sears today to get a really smoot...
A Luthier's List of Tools: Outfitting a Violin Maker's Workshop

I've compiled a list of tools one might need to create a violin, including the most necessary items and a few "nice-to-have" i...
Working on a Stainer Violin Mold

More work on my violin mould at Elmer's shop. Today I finished drilling the clamp holes, rough cut the mould outline, drill-pressed...

Saturday, April 13, 2013

The Chopping Block

No comments:

Post a Comment